|
brake pads - “AD” material
|
CHARACTERISTICS: |
A metal–ceramic and graphite iron friction material that is suitable
for both dry and wet friction applications.
This you can use for:
- gross weight cranes
- excerptions
- escalators
- fork lifts |
 |
|
|
Material can be use for dry friction and for dry in oil bath |
|
FEATURES: |
 |
High static friction coefficient. |
 |
Good abrasive resistance. |
 |
High braking power to 850°C. |
 |
The sintered friction material is soldered to the copper coated
backing plate, so Separation (which can happen with organic material)
is virtually eliminated
as a Failure risk. |
 |
Low abrasive interaction with the brake rotor material. |
 |
Three(3) times +/- longer operational life compared to organic
and Kevlar composite
Materials. |
|
|
|
MATERIAL OPERATING PARAMETERS: |
Specific pressure: |
P < 5.0 Mpa. |
Sliding speed: |
V < 40m.s-1 |
Constant maximum temp.: |
600 °C |
Short time maximum temp.: |
900 °C |
|
|
|
NOTES : |
 |
Replacement of brake pads should be done in dry clean conditions.
If the friction material Comes into contact with oil or brake fluid and the liquid
soaks into the pores of the friction Material, a catastrophic fall in friction
coefficient (braking performance) could occur. |
 |
Braking performance is significantly influenced by the quality
of the braking surface of the Disc rotor, by the age and quality
of the brake fluid, and by the correct choice of Complementary friction
pad material. |
 |
BRAKE WITH THE GOLDfren products! |
|
|