brake pads - “DS” material
 
 CHARACTERISTICS:

A sophisticated metal-ceramic formulation for racing use; „DS” material is produced by „Progressive Powder Technology” – a leader in the field of sintered technologies.

This is material for special sports use for MTB race		 DS - materiál

FEATURES:

  • Very high static friction coefficient.
  • Minimal difference between wet and dry braking performance.
  • Good abrasive resistance
  • High braking power to 800°C
  • Low abrasive interaction with the brake rotor material.
  • Three(3) times +/- longer life compared to organic and kevlar composite materials.

MATERIAL OPERATING PARAMETERS:

Specific pressure: .....................p < 5.0 Mpa
Sliding speed: ..........................V < 20 m.s-1
Constant maximum temp.: ......600°C
Short time maximum temp.: ....850°C

NOTES:

  • Replacement of brake pads should be done in dry clean conditions. If the friction material Comes into contact with oil or brake fluid and the liquid soaks into the pores of the friction Material, a catastrophic fall in friction coefficient (braking performance) could occur.
  • Braking performance is significantly influenced by the quality of the braking surface of the Disc rotor, by the age and quality of the brake fluid, and by the correct choice of Complementary friction pad material.
  • BRAKE WITH THE GOLDfren products!

POZOR :

  • Na brzdné účinky mají velký vliv různé okolnosti:
    Stav a stáří brzdové kapaliny, kvalita materiálu a stav brzdového kotouče a správné zvolení materiálu pro vhodný brzdný účinek.