| |
brake pads - “S3” material
|
| CHARACTERISTICS : |
A sophisticated metal-ceramic formulation for racing use; „S3” material
is produced by „Progressive Powder Technology” – a leader in the field
of sintered
technologies.
|
 |
|
| |
| This is material for special sports use for MTB. |
| |
| FEATURES : |
 |
Very high static friction coefficient. |
|
Minimal difference between wet and dry braking performance. |
| |
Good abrasive resistance |
| |
Low abrasive interaction with the brake rotor material. |
| |
Three(3) times +/- longer life compared to organic and kevlar
composite materials. |
|
| |
| |
| MATERIAL OPERATING PARAMETERS: |
| Specific pressure: |
P < 3.0 Mpa. |
| Sliding speed: |
V < 45m.s-1 |
| Constant maximum temp.: |
450 °C |
| Short time maximum temp.: |
800 °C |
|
| |
| |
| NOTES : |
| |
Replacement of brake pads should be done in dry clean conditions.
If the friction material Comes into contact with oil or brake fluid
and the liquid soaks into the pores of the friction Material, a catastrophic
fall in friction coefficient (braking performance) could occur. |
| |
Braking performance is significantly influenced by the quality
of the braking surface of the Disc rotor, by the age and quality
of the brake fluid, and by the correct choice of Complementary friction
pad material. |
| |
BRAKE WITH THE GOLDfren products! |
|
| |